Dover Tipper Tie RS4203 - Control System Drawings; Horn, Skin Brake, and Knife Drawings; Voider Assembly Drawings

RS4203 Manual Chapter 18 - Assembly Drawings
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 114
18.4 Controls
00-1731 Din Rail A
00-1732 Din Rail B
00-1733 Din Rail C
00-1734 Din Rail D
00-1735 Din Rail E
00-2147 Touch Screen Cover
00-2204 Enclosure, Heater/Fan
73-0052 Panel
73-0053 Enclosure
73-0054 RS4203 Control Box Assembly Complete
73-0055 RS4203 Operator Interface Assembly
18.5 Horns, Skin Brakes, Internal Knife
00-0495 2” Inner Vacuum Ring/ Horn
00-0521 2 1/2” Inner Vacuum Ring/ Horn
00-0536 1 1/2” Inner Vacuum Ring/ Horn
00-0846 Internal Knife (for 2” or 2 1/2” Horns)
00-1542 Skin Brake Holder
00-1729 2 3/8” Horn Rotor
00-1730 Out of Casing Sensor
00-1749 4” Horn Rotor
00-1756 Skin Brake slide (2- position)
00-1758 Skin Brake Slide (3- position)
00-2885 3” Horn Rotor
00-2886 4” Horn Rotor
04-0446 Cylinder Mount (for 00-1756 Skin Brake Slide)
50-0400 3” Inner Vacuum Ring/ Horn
50-0404 4” Inner Vacuum Ring/ Horn
50-0550 Double skin brake Horn kit (used on 00-1758 Skin Brake Slide, 3 - Position)
50-0800 Double skin brake Horn Kit (used on 00-1756 Skin Brake Slide, 2 - Position)
18.6 Voiders
00-1523 Slack Fill
00-1524 Non Slack Fill
00-1525 Frame
00-1551 Rotary Actuator
00-1552 Voider Open Adjustment
00-1553 Voider Spread (Slack Fill)
00-1554 Slack Fill Voider Shaft
00-1555 Voider Spread Stop
00-1556 Stationary Voider
00-1557 Stationary Voider Sub-Assembly
00-1558 Moveable Voider Sub-Assembly
00-1559 Moveable Voider
00-1560 Yoke
00-1561 Conveyor Yoke
00-1562 Voider Open and Close Proximity
00-1563 Voider Spread - Proximity Switch Mount
00-1564 Voider Spread (Non Slack Fill), Cylinder
00-1565 Voider Shaft, (Non Slack Fill)
00-1566 Voider Shaft (Non Slack)
00-1585 3-Way Valve-with Tee
00-1586 3-Way Valve-with Elbow