RS4203 Manual Chapter 18 - Assembly Drawings
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 116
T10 Single Belt Dump Conveyors (Used on machines after October 2004):
00-2206 Nose Tray Roller Assembly (also used in standard conveyors, above)
00-2208 Hitch Bar Assembly (also used in standard conveyors, above)
00-2280 Drive Roller Assembly
00-2282 Paddle Mount – Short
00-2283 Short Dump Conveyor – End Tray
57-0900 Dump Conveyor Assembly
Used on both Dual and Single Belt Dump Conveyors:
00-1725 Conveyor Height Adjuster Assembly (also used in standard conveyors, above)
00-1881 Front Trip Paddle Assembly (also used in standard conveyors, above)
00-2063 Conveyor Roller Carriage Assembly
00-2071 Dump Conveyor Inner Leg Assembly
00-2089 Dump Conveyor Support Assembly
00-2129 Dump Conveyor Mount Assembly
00-2151 Air Motor Lubricator Assembly
00-2178 Dump Conveyor Air Motor Assembly
00-2179 Trip Paddle Mount Assembly (also used in standard conveyors, above)
00-2187 Dump Conveyor Trip Paddle Assembly
00-2188 Dump Sensor Mount Assembly
00-2189 Conveyor Dump Paddles Assembly
00-2191 Dump Conveyor End Tray Assembly
00-2199 Dump Conveyor Reverse Trip Paddle
73-0045 Dump Conveyor Control Box Assembly
73-0046 Dump Conveyor Control Panel Assembly
18.9 Schematics
63-4215* Electrical Schematic*
63-4216 Pneumatic Schematic
*Two schematics with the same control number are provided. For clipper models that have implemented
the Elobau Safety Switch Control, use the later version of the schematic. For earlier models, use the
earlier version of the schematic.
18.10 Options
Looper
SL-60ST Looper (optional)
00-1364 Loop Index Wheel Brake Assembly (optional)
00-1741 30 mm Loop Index Wheel (optional)
00-1744 Looper Idler Wheel (optional)
00-1751 Loop Spool Mount (optional)
00-1851 Loop & Knot Catch Door Assembly (optional)
00-1904 Lower Strip Plate Valve Assembly (optional)
00-1917 Loop Drive Cylinder Assembly (optional)
Registration
00-2304 Registration Assembly (optional)
00-2088 Horn Detent Assembly (for optional registration)
Horn Vacuum
00-1775 Horn Vacuum Assembly (optional)
Water Spray
00-2887 RS4203 Water Spray Assembly
To Next Page
Loading...