RS4203 Manual Chapter 6 - Machine Operation
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 39
6.3 Loading Clips – Stick Clips
Tipper Tie stick clips are easily loaded for dispensing. Clips are held in place
within the clip rail and guided towards the punch by means of a clip weight.
Position the clips so that they slide down the rail, and gently guide them down
the rail.
Fit the clip weight so that it slides into the groove in the rail. Gently slide it
down the rail until it rests on the clips.
To Next Page
Loading...