Dover Tipper Tie RS4203 - Voider Closed Position Adjustment

RS4203 Manual Chapter 10 - Clipper and Looper Operation and Adjustments
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 65
10.6 Voider Closed Position Iris Opening
The closed position voider opening is adjustable. This feature controls the amount of residual product that
is left in the tail portion of the package. This adjustment allows for various diameters of products to be run
on the same machine. Larger diameter casings require a larger closed position opening.
To adjust the iris opening, loosen the voider adjustment locking knob. Rotate the voider opening
adjustment wheel counterclockwise to close the voider opening.
Caution: A small adjustment produces a large change in the voider opening. Always make adjustments in
small, measured increments.
Warning: Closing the opening completely will stall the voider extend function of the machine.
Voider adjustment
locking knob
Voider opening
adjustment wheel
Turn counterclockwise
to close
the voider opening