RS4203 Manual Chapter 18 - Assembly Drawings
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 115
00-1587 Rotary Actuator/ 3-Way Valve-with Tee
00-1588 Rotary Actuator/ 3-Way Valve-with Elbow
15-0302 Main Voider Shaft
18.7 Guarding
00-1770 Horn
00-2050 RS4203 Guarding Assembly
00-2051 Clipper
00-2052 Conveyor
00-2053 Horn Guard Assembly
00-2054 Left Lower Door
00-2055 Right Lower Door
18.8 Conveyors
Standard Conveyors
T5 Dual Belt Conveyors (Used on machines before October 2004):
00-1567 48” Conveyor
00-1723 Hitch Bar
00-1724 Roll Carriage
00-1748 Valve
00-1809 Conveyor roller carriage
00-3060 60” Conveyor
00-3072 72” Conveyor
T10 Single Belt Conveyors (Used on machines after October 2004):
00-2206 Conveyor Nose Roller Assembly
00-2207 Conveyor Roller Carriage Assembly
00-2208 Conveyor Hitch Bar Assembly
00-2278 Conveyor Drive Roller Assembly
00-2279 Conveyor Air Motor Assembly
57-3048 48” Conveyor assembly
57-3060 60” Conveyor assembly (Note: Product diverter is an option)
57-3072 72” Conveyor assembly (Note: Product diverter is an option)
Used on both Dual and Single Belt Conveyors:
00-1573 Diverter
00-1725 Height Adjuster
00-1808 60” Conveyor mount
00-1810 48” Conveyor mount
00-1817 72” Conveyor mount
00-1881 Trip Paddle
00-1918 Conveyor valve
00-2108 Conveyor Motor Lubricator
00-2179 Trip Paddle Mount Assembly
Dump Conveyors
T5 Dual Belt Dump Conveyors (Used on machines before October 2004):
00-2062 Conveyor Hitch Bar Assembly
To Next Page
Loading...