RS4203 Manual Chapter 8 - Touch Screen
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 50
8.2 Home Screen
The HOME screen provides access to the INPUT and OUTPUT screens; the RUN, RECIPE, and SEQ
(sequence) screens; the PLC error screen; the KEYENCE calibration screen; and the CHANGE USER
module. It also provides the jog filler button and displays the total machine cycles.
The part number of the operator interface
software as well as the part number of the
software currently installed in the PLC is
displayed on this screen (as shown in the
lower right of the illustration).
To Next Page
Loading...