Dover Tipper Tie RS4203 - Safety Illustrations

RS4203 Manual Chapter 2 - Safety Instructions
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 22
Caution: Do not attempt to install, setup or operate this machine before you have read
and understood this manual and any accompanying suppliers’ manuals.
2.6 Safety Illustrations
Emergency Stop Buttons
Push the Emergency Stop button on the control panel or on the remote to immediately stop the machine.
Remote Emergency Stop
The RS4203 has a remote emergency stop button, which is located
on the remote control panel. Press the E-Stop to immediately stop the
machine.
EMERGENCY STOP
MANUAL CLIP
FEED LOOP
CTC
Parker
POWER
Operator Interface
CYCLE
START/STOP
LOAD/RUN
(Voider Shuttle)
TOUCH
SCREEN
and
LOOP (optional)
TOUCH
SCREEN
CYCLE
START/STOP
MANUAL
CLIP AND LOOP
(looper optional)
FEED
LOOP
(optional)
LOAD/RUN
SKIN BRAKE
SHUTTLE
EMERGENCY STOP
Control Panel
Push the
EMERGENCY
STOP
button to stop
the machine
immediately.
Twist the button
clockwise to reset the
machine for operation.
(Note: If the machine
has push/pull style E-
Stops, pull the button out
to reset the machine.)