RS4203 Manual Chapter 8 - Touch Screen
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 51
8.3 Recipe Screen
The recipe screen is used to setup or modify operating parameters and menus.
Use the up or down arrows to select the menu
item. The item will then be highlighted.
Press the EDIT key. A numeric keyboard is
displayed. To edit the highlighted menu item,
enter the values on the keyboard, and press
ENTER. The SAVE LIST button on the main
recipe screen toggles to read “press to save
values”. Press it to save your new values. (Note:
The SAVE LIST button may be password
protected to prevent unauthorized modification
of recipes.
If only an ON/OFF parameter is to be changed,
pressing the EDIT key changes the state of the
parameter.
After all of your new recipe values have been
edited and saved, press the SEND LIST key to
download the new settings to the PLC.
Caution: The values shown in the recipe menu
list are not downloaded to the PLC (will not take
effect) until the SEND LIST key is pressed.
To Next Page
Loading...