RS4203 Manual Chapter 1 - Machine Description and Specifications
Rev 32, 01/11/13 Copyright © 2013, Tipper Tie, Inc., All rights reserved 14
The following name plate is for the high voltage RS4203.
Model
Machine Family
Serial Number
Production Date
Machine Weight
Max Allowable Air Pressure
Pneumatic Schematic Number
Rated Voltage and Phase *
Frequency
Rated current of the machine including multiple voltages
Current consumption of largest motor
Max Allowable fuse size for normal overcurrent protection
Overall Short Circuit Current Rating
Electrical Schematic Number
Power consumed by the machine in KVA or Watts
* Note: The 230 volt version does not include a heater/fan combination.
Additional Specifications
• Electric control box heater: 115 VAC, 100 watt, 50/60 Hz.
Note: Check the voltage requirements of the heater before connecting input power to the
RS4203.
• Air consumption: 35 SCFM at 90 PSI (991 Liters at 6,2 bar)
• Cycle time: Variable pump-off time with a minimum of 2.5 seconds
• Clip size: Z400-series stick clips (Z4270M clipper)
or
ZR400-series reel-fed clips (Z4270RP clipper)
• Machine weight: 1220 pounds (553,4 Kg)
• Shipping weight: 1700 pounds (771,1 Kg)
To Next Page
Loading...