Instructions for use | Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n 105
Getting started
6.3 Password dialog
After the device is switched on for the first time, the password dialog appears in
which the user password and the service password can be assigned. Assign both
passwords to protect the device settings from unauthorized access. Skip password
assignment only in emergencies. If none or only one of the passwords is assigned,
the password dialog will appear again each time the device is switched on.
User password
The password can be used to open certain dialogs to configure settings. The
password can only be reset by service personnel.
Service password
The service dialog can be opened with the password. The password can only be
reset by specialized service personnel.
6.4 Checking the device configuration
The device can be customized to suit the requirements of the user. Settings for the
following features are possible:
– Start settings for the ventilation
– Alarm limits
– General device behavior
With mechanically controlled gas mixers with flow tubes, a one-time adjustment for
the height above sea level is required.
For further information about the configuration, see page 203.
49710
To Next Page
Loading...
Need help?
General
