Instructions for use | Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n 157
Operation
1. Start the Pause operation mode (1).
2. If necessary, adjust the timer (2).
8.4.4.2 Returning to the previous mode
1. Touch the Resume ventilation button (1).
2. Confirm the ventilation mode.
If the Pause operation mode was started from standby, ventilation will continue
in Man / Spon mode.
For more information, see page 208.
8.5 Maneuvers
8.5.1 General information
The device has various maneuvers for lung recruitment. During a maneuver,
various data concerning the lung mechanics are displayed so that the user can
assess the progress of the maneuver.
The reminder function reminds the user to perform a maneuver. A reminder is
issued after the first change to a ventilation mode with medium or high breathing
support and also at settable intervals after the ending of a maneuver. The Consider
recruitment message is displayed in the waveforms for flow and pressure.
The use of lung recruitment maneuvers is the sole responsibility of the user.
Dräger recommends that the patient's hemodynamics always be monitored while
the maneuvers are being performed.
Available maneuvers
– Insp./Exp. hold
– One-step recruitment
– Multi-step recruitment
1. Open the Procedures dialog window.
2. Touch the tab for the required maneuver.
46651
46652
To Next Page
Loading...
Need help?
General
