Instructions for use | Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n 93
Assembly and preparation
4.9 Connecting and replacing consumables
4.9.1 Disposable CO2 absorber
● Connect or replace the CLIC absorber in accordance with its instructions for
use.
4.9.2 Reusable CO2 absorber
As an alternative to disposable CO2 absorbers, a reusable CO2 absorber may also
be used.
4.9.2.1 Dismounting and emptying
1. Unscrew the CO
2 absorber (1) from the breathing system.
2. Remove and dispose of the disposable dust filter (2), if present.
CAUTION
Risk of chemical burns
Soda lime is caustic and is a strong irritant for eyes, skin, and airway.
► Handle the soda lime carefully and do not spill it.
3. Empty out the used soda lime and dispose of it according to its instructions for
use.
4. Remove the absorber insert (3) from the absorber container. The sealing ring (4)
remains on the absorber insert.
Perform the further reprocessing of the individual components in accordance with
the reprocessing instructions supplied with the product.
3710739487
3
4
To Next Page
Loading...
Need help?
General
