Dräger Atlan A100

Instructions for use | Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n 45
Overview
Advanced ventilation
monitoring
Includes the following functions:
– Display of patient compliance with trend
– Display of loops (Pressure-Volume and Flow-
Volume)
– Volumeter (bar graphic for monitoring the inspira-
tory and expiratory tidal volumes)
– Display of the patient-triggered, mechanically sup-
ported minute volume compared with the manda-
tory minute volume
Loops and trends – Graphical trend of measured values
– Export of trend data to USB mass storage device
– Display of patient compliance with trend
– Display of loops (Pressure-Volume and Flow-
Volume)
– Volumeter (bar graphic for monitoring the inspira-
tory and expiratory tidal volumes)
Advanced gas monitoring Includes the following functions:
– Indicator for the efficiency of the fresh-gas setting
and anesthetic agent consumption (econometer
with trend and low-flow wizard)
– Display of gas consumption
– Display of anesthetic agent consumption and
uptake
– Display of MV×CO
2 with trend
– Display of O
2 uptake with trend
Advanced neonatal sup-
port
Includes advanced ventilation functions and monitor-
ing functions for the ventilation of neonates:
– Minimum settable tidal volume of 5 mL
– Higher sweep speed
Expert view Optionally provides the following extensions:
– 1 additional waveform
– 1 additional row with parameter fields
Lung recruitment Includes the following functions:
– One-step recruitment
– Multi-step recruitment
– Reminder function:
Displays a message during ventilation to remind
the user to perform a lung recruitment maneuver.
– Inspiration Hold, Expiration Hold:
– Extension of the breath.
– Extension of the expiration and delay of the next
breath.
Auto On Allows the device to automatically switch on and the
system test to be performed automatically so that the
device is ready for operation at a defined time.
Name Description