Dräger EVITA XL - Cleaning and Disinfection

34 Pocket Guide Evita XL
Cleaning and disinfection
Cleaning and disinfection
NOTE
The Evita XL Pocket Guide is not a replacement or substitute for the Instructions for Use.
Any use of the device requires full understanding and strict observation of the Instructions for Use.
Components which can be
reprocessed
Recommended
reprocessing
intervals
Machine
cleaning and
disinfection
Manual Sterilization
Cleaning Disinfection
Evita XL basic device after each patient no outside outside no
Trolley after each patient no outside outside no
Hinged arm
Gas supply hose
Breathing hoses after each patient/
weekly
yes possible possible yes
Y-piece
Water traps
Collection containers
Adapter parts for the medication
nebulizer
Reusable expiratory valve and, if
necessary, individual parts
after each patient/
weekly
1)
yes possible possible
2)
yes
Disposable expiratory valve Dispose of after each patient/weekly
Spirolog flow sensor daily no outside yes no
SpiroLife flow sensor daily no outside yes yes
Neonatal flow sensor insert daily no outside yes yes
Neonatal flow sensor housing daily yes possible possible yes
Temperature sensor daily no outside outside
3)
yes
CO
2 sensor daily no outside outside
4)
no
Reusable cuvette of the CO
2 sen-
sor
daily yes possible possible yes
Disposable cuvette of the CO
2
sensor
Dispose of after each patient/weekly
Test filter for CO
2 sensor daily no outside
4)
outside no
Breathing gas humidifier after each patient/
weekly
In accordance with separate Instructions for Use
Medication nebulizer In accordance with separate Instructions for Use
Bacterial filter In accordance with separate Instructions for Use
1) Nebulizing may lead to formation of more extensive deposits requiring more frequent replacement.
2) Additionally treat the expiratory valve after disinfection.
3) Do not bath-disinfect.
4) Do not bath-disinfect. Wipe-disinfect, e. g., with 70 % ethanol.