Calculations
184 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
To perform a calculation
In the following steps, the letters in parentheses
correspond to the diagram for the Calculations
page (see page 183).
1 Select the Procedures... button from the main
menu bar.
2 Select the Calculations tab (if not already
selected).
3 Select the Capture values button (B). The
Cockpit populates the available parameter
buttons with the current values.
4 Select the Capture labs button (C). The
Cockpit populates the available laboratory
parameter buttons with current values.
5 Edit or add any value by selecting the button
next to a parameter label to activate a popup
with a keypad. The popup displays the valid
range of the selected parameter. Any modified
value is identified by the symbol #.
6 Select the Enter button on the keypad popup to
confirm your input. Any value that has been
altered manually is identified with the symbol #.
7 Repeat steps 4 and 5 for additional parameters.
8 Select the Calculate results button (D). The
calculated values are listed.
To Next Page
Loading...
