Scio Monitoring
372 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Agent display
The agent waveforms and parameters can be
identified by color as follows:
– Sevoflurane = yellow
– Desflurane = blue
– Isoflurane = purple
– Halothane = red
– Enflurane = orange
The appearance of the agent parameter field varies
depending on the number of identified agents.
Typical agent parameter field displays are shown
below.
Agent parameter field
On the Cockpit, the default Agent parameter field
displays the current values for:
– Inspired agent (e.g., inSev) – the level of
anesthetic agent in the airway during the
inspiration phase
– Expired agent (e.g., etSev) – the level of
anesthetic agent in the airway during the
expiration phase
A Abbreviation for primary anesthetic agent (may
display Agent? during agent identification for
gas analyzers with automatic identification)
B Inspired primary agent value – the level of
anesthetic agent in the airway during the
inspiration phase
C Abbreviation for "inspiratory"
D Inspiratory alarm limits for primary agent
E Abbreviation for "expiratory"
F Expired primary agent value – the level of
anesthetic agent in the airway during the
expiration phase
G Expiratory alarm limits for primary agent
H Expiratory alarm limits for secondary agent
I Expired secondary agent value – the level of
anesthetic agent in the airway during the
expiration phase
J Inspiratory alarm limits for secondary agent
K Inspired secondary agent value – the level of
anesthetic agent in the airway during the
inspiration phase
L Abbreviation for secondary anesthetic agent
(for gas analyzers with automatic identification)
Agent_pbox_en.pdf
O2
4.4
0.0
in et
10.1
0.0
12.7
0.0
20.0
0.0
3.04
3.04
3.0 3.0
To Next Page
Loading...
