Dräger Infinity C500 - Configuring Profiles

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 487
System configuration
Configuring profiles
The following diagram shows a patient-specific
Profiles page for configuring profiles. These pages
allow you to modify existing profiles such as the
name of the profile, the profile description, and so
on.
There are three pages for each patient category
(adult, pediatric, and neonate).
A Adult tab
B Pediatric tab
C Neonate tab
D Views tab
E Set as Default button
F Delete Profile button
G Profile name field and setup button
H Description field and setup button
I Views... button
J Default view field and selection arrow
K Pick list of available profiles
To access the patient-specific Profiles pages
1 Select the System setup... button from the
main menu bar.
2 Select the Profiles tab.
3 Select the Profiles/ views tab.
4 Select either the Adult (A), Neonate (B),
Pediatric (C) tabs to access the patient
category-specific pages.
062
A
B
C
D
E
F
G
H
I
J
K
System setup