Dräger Infinity C500 - Accessing CCO;SvO2 Settings

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 399
External device – continuous cardiac output (CCO)
Accessing the CCO/SvO2 settings
1 Select the Sensor parameters... button from
the main menu bar.
2 Select the CCO tab. If you cannot see the tab,
select the following two symbols located in the
upper right corner of the dialog: symbol and
the display filter button.
SvO2 parameter setup functions
Selection Available settings Description
Parameter 1 SvO2 (default), Tblood, CCO, CCI, VO2,
DO2, SaO2, SVR, SVRI, EDV, EDVI, ESV,
ESVI, EF, SV, SVI, SVV
Selects the primary parameter
in the CCO parameter field.
Parameter 2 SvO2, Tblood, CCO (default), CCI, VO2,
DO2, SaO2, SVR, SVRI, EDV, EDVI, ESV,
ESVI, EF, SV, SVI, SVV
Selects the secondary
parameter in the CCO
parameter field.
Parameter 3 SvO2, Tblood, CCO, CCI, VO2, DO2, SaO2,
SVR (default), SVRI, EDV, EDVI, ESV, ESVI,
EF, SV, SV
I, SVV
Selects the third p
arameter in
the CCO parameter field.
CCO mini trend SvO2, SVV, CCO (default), CCI, SVR, SVRI,
SV, SVI
Selects the parameter to be
included in the mini-trend.