Dräger Infinity C500 - Continuous Mode; Interval Mode

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 295
Non-invasive blood pressure (NIBP)
Continuous mode
The following diagram shows a parameter field
when the continuous non-invasive blood pressure
mode is selected (see page 298).
A NIBP parameter label
B Unit of measurement (can be
activated/deactivated)
C Time since last non-invasive blood pressure
measurement
D Mean pressure value
E Alarm limits or crossed triangle symbols when
alarms are deactivated
F Time remaining before continuous mode is
terminated
G Label Cont. mode
H Unit of measurement
I Inflation pressure value
J Label Inflation pressure
K Systolic/diastolic pressure value
Interval mode
The following diagram shows a parameter field
when the interval mode is selected (see page 297
for more information).
A NIBP parameter label
B Unit of measurement (can be
activated/deactivated)
C Time since last non-invasive blood pressure
measurement
D Last mean pressure value
E Alarm limits or crossed triangle symbols when
alarms are deactivated
F Selected inflation interval (see page 300)
G Inflation pressure value or progress indicator
H Label auto (after the measurement is
completed, a progress indicator replaces the
label to indicate the time before the start of the
next measurement)
I Systolic and diastolic pressure value
041
AB C
D
E
FGHIJ
K
043
AB C
D
E
FGH
I