Dräger Infinity C500 - Settings Not Included in a Profile

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 81
Operating concept
Settings not included in a profile
The following settings are not included in a profile
and must be configured separately. These settings
remain unchanged until they are manually changed
again by the user.
Parameter/system fea-
ture
Setting
Non-invasive blood
pressure
(see page 295)
Venous stasis
Continuous mode
ST
(see page 234)
ST relearn
Arrhythmia
(see page 225)
Relearn
Respiration
(see page 240)
Relearn
Invasive blood pressure
(see page 319)
Selected labels from
M540
etCO2 (Infinity MCable –
Mainstream CO
2)
(see page 345)
Atm. pressure
Alarm history
(see page 139)
Filter settings (All,
Arrhythmia, High-
priority, Medium-
priority, Low-priority,
Time, Priority,
Message)
System setup... >
General settings
(see page 458)
All alarms paused
SpO2 alarm delay
Alarms > Settings Alarm group
Volume/ Tone
(see page 461)
"Audio off" reminder