Dräger Infinity C500 - Infinity P2500 Power Supply Unit (P2500); Infinity PS250 Power Supply Unit (PS250)

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 27
System overview
Infinity PS250 power supply unit (PS250)
The following diagram shows the bottom of the
PS250.
A Infinity network connectors
B Nurse call connector
C Export protocol connector
D Power cable connection
E Two interchangeable system cable connectors
– one for the M540, one for the Cockpit
F Network connection LEDs
The front of the PS250 has the following two LEDs:
– Power mains – lights up green when the
device is connected to AC power.
– Battery indicator – yellow LED that
lights up briefly during startup or fault
conditions such as a faulty battery.
Infinity P2500 power supply unit (P2500)
The following diagram shows the bottom of the
P2500.
A Two interchangeable system cable connectors
– one for the M540, one for the Cockpit
B Power cable connection
C Infinity network connector
D Nurse call connector
E Export protocol connector
The front of the P2500 has the following two LEDs:
– Power mains – lights up green when the
device is connected to AC power.
– Battery indicator – yellow LED that
lights up briefly during startup or fault
conditions such as a faulty battery.
004
D
C
B
A
E
F
F
357
A
B
C
D
E