Dräger Oxylog 3000 plus - Page 117

Instructions for use Oxylog 3000 plus SW 1.n 117
Troubleshooting
Psupp = 22 mbar Change in ΔPsupp or
PEEP.
Psupp
is the absolute
pressure resulting from
PEEP +ΔPsupp.
VT = 400 mL or RR = 12/min
Ti= 1.5 s
Flow = 15 L/min
I:E Change in VT or RR, in
ventilation mode VC-CMV,
VC-AC or VC-SIMV.
VT = 400 mL or RR = 12/min
I:E= 1:1.5
Flow = 15 L/min
Ti
RR = 12/min
Ti= 1.5 s
Te = 9 .5 s
I:E Change in RR, in ventilation
mode PC-BIPAP.
RR = 12/min
I:E= 1:1.5
Te = 9 .5 s
Ti
Ti= 1.5 s
Flow = 15 L/min
I:E Change in I:E, Ti or Tplat in
ventilation mode VC-CMV,
VC-AC or VC-SIMV. Or
change in RRapn or VT, in
ventilation mode Spn-CPAP.
I:E= 1.5:1
Flow = 15 L/min
Ti
Ti= 1.5 s
Te = 9 .5 s
I:E Change in I:E or Ti, in
ventilation mode PC-BIPAP.
I:E= 1:1.5
Te = 9 .5 s
Ti
1) Unit I:E or Ti is configurable. Refer to ”Customer Service Mode“ on page 97.
Message Unit
1)
Cause Explanation/Remedy