Instructions for use Oxylog 3000 plus SW 1.n 129
Reprocessing
After reprocessing
Preparation before next use of device
Assembling and fitting patient-specific accessories
and consumables.
Procedure:
– Reassemble in accordance with the
information provided in section "Assembly"
on page 35.
– Connect to the power supply and gas supply
in accordance with the information provided
in section "Assembly" on page 35.
Checking the operational readiness
Prerequisites:
– The device has been assembled and prepared
so that it is ready for operation.
Procedure:
– Check readiness for operation in accordance
with the information provided in section "Getting
started" on page 51.
To Next Page
Loading...
