Dräger Oxylog 3000 plus - EMC Declaration

Instructions for use Oxylog 3000 plus SW 1.n 151
Technical data
EMC declaration
General Information
The EMC conformity of Oxylog 3000 plus includes
the use of the following external cables,
transducers and accessories:
– AC/DC power pack
– DC/DC converter
– Multi-purpose wall holder
– Equipment holder
– Carrying bag
– Quick Power Connector
– Carrying System
–CO
2 sensor
–CO
2 extension cable
– Data communication cable
This device was tested for electromagnetic
compatibility using accessories from the list of
accessories. Other accessories may only be used
if they do not compromise the electromagnetic
compatibility. The use of non-compliant
accessories may result in increased
electromagnetic emissions or decreased
electromagnetic immunity of the device.
This device may be used in the direct vicinity of
other devices only if Dräger has approved this
device arrangement. If no approval has been given
by Dräger, it must be ensured that this device
functions correctly in the desired arrangement
before use. The instructions for use for the other
devices must be followed.