Dräger Oxylog 3000 plus - Monitoring

Instructions for use Oxylog 3000 plus SW 1.n 89
Monitoring
Monitoring
Displaying curves. . . . . . . . . . . . . . . . . . . . . 90
Displaying measured values . . . . . . . . . . . . 90
CO
2 measurement (optional). . . . . . . . . . . . 91
Selecting the cuvette type . . . . . . . . . . . . . . . 91
Checking the CO2 sensor during
ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Performing zero calibration during
ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Checking the CO
2 filter during ventilation. . . . 93
Data communication (option) . . . . . . . . . . . 94
Connecting an external device . . . . . . . . . . . . 94
Serial port . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Requirements for the electrical properties of
connected devices and networks . . . . . . . . . . 94
Connections to IT networks . . . . . . . . . . . . . . 94