Dräger Polytron 8100 - Calibration interval; Set sensor test; Fast Response

26 Dräger Polytron 8100
Menu
5.9.8 Calibration interval
After the calibration interval expires, the instrument will issue a
warning that the calibration is past due.
 Select Settings > Sensor > Calibration interval
and confirm.
 Set the calibration interval and confirm.
5.9.9 Set sensor test
This function is only active for Polytron 8000 using the EC
sensor.
This function is only active it the sensor test or diagnostics
dongle is installed.
This function periodically initiates the sensor self-test.
 Select Settings > Sensor > Set sensor-test and confirm.
 Select Enable or Disable and confirm.
5.9.10 Fast Response
This function is only activated for Polytron 87X0 using the
PIR 7X00 sensor.
NOTICE
The calibration interval can be set between 0 and
720 days.
i
i