Vigor2120 Series User’s Guide
184
Action
Display the packets to be passed /blocked.
CSM
Display the content security managed
Move Up/Down
Use Up or Down link to move the order of the filter rules.
Next Filter Set
Set the link to the next filter set to be executed after the
current filter run. Do not make a loop with many filter sets.
Wizard Mode
Allow to configure frequently used settings for filter rule
via several setting pages.
Advance Mode
Allow to configure detailed settings of filter rule.
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click Index 1. The setting page will appear as follows:
Available settings are explained as follows:
Item Description
Comments
Enter filter set comments/description. Maximum length is
14- character long.
Direction
Set the direction of packet flow. It is for Data Filter only.
For the Call Filter, this setting is not available since Call
Filter is only applied to outgoing traffic.
To Next Page
Loading...
Need help?
General
