Vigor2120 Series User’s Guide
313
4
4
.
.
1
1
2
2
.
.
9
9
A
A
P
P
D
D
i
i
s
s
c
c
o
o
v
v
e
e
r
r
y
y
Vigor router can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage. Also, it can be
used to facilitate finding an AP for a WDS link. Notice that during the scanning process (about
5 seconds), no client is allowed to connect to Vigor.
This page is used to scan the existence of the APs on the wireless LAN. Yet, only the AP
which is in the same channel of this router can be found. Please click Scan to discover APs in
the neighborhood.
Available settings are explained as follows:
Item Description
Scan
It is used to discover AP(s) in the neighborhood. The results
will be shown on the box above this button.
Statistics
It displays the statistics for the channels used by APs.
Add to
If you want the found AP applying the WDS settings,
please type in the AP’s MAC address on the bottom of the
page and click Bridge or Repeater. Next, click Add to.
Later, the MAC address of the AP will be added to Bridge
or Repeater field of WDS settings page.
To Next Page
Loading...
Need help?
General
