Vigor2120 Series User’s Guide
199
IP object with the selected type will be shown on this page.
Set to Factory Default
Clear all profiles.
Search
Type a string of the IP object that you wan to search.
Index
Display the profile number that you can configure.
Name
Display the name of the object profile.
Address
Display the IP address configured for the object profile.
Export IP Object
Usually, the IP objects can be created one by one through
the web page of Objects>>IP Object. However, to a user
who wants to save more time in bulk creating IP objects, a
quick method is offered by Vigor router to modify the IP
objects with a single file, a CSV file.
All of the IP objects (or the template) can be exported as a
file by clicking Download. Then the user can open the CSV
file through Microsoft Excel and modify all the IP objects
at the same time.
Backup the current IP Objects with a CSV file – Click it
to backup current IP objecsts as a CSV file. Such file can be
restored for future use.
Download the default CSV template to edit – After
clicking it, press Download to store the default CSM
template (a table without any input data) to your hard disk.
Download – Download the CSV file from Vigor router and
store in your hard disk.
Restore IP Object
Select – Click it to specify a predefined CSV file.
Restore – Import the selected CSV file onto Vigor router.
To set a new profile, please do the steps listed below:
1. Click the number (e.g., #1) under Index column for configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name
Type a name for this profile. Maximum 15 characters are
To Next Page
Loading...
Need help?
General
