Vigor2120 Series User’s Guide
218
To set a new profile, please do the steps listed below:
1. Click the Mail Server tab, and click the number (e.g., #1) under Index column for
configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name
Type a name for such mail service profile. The maximum
length of the name you can set is 31 characters.
SMTP Server
Type the IP address of the mail server.
SMTP Port
Type the port number for SMTP server.
Sender Address
Type the e-mail address of the sender.
Use SSL
Check this box to enable such function.
Authentication
The mail server must be authenticated with the correct
username and password to have the right of sending
message out. Check the box to enable the function.
Username – Type a name for authentication. The
maximum length of the name you can set is 31 characters.
Password – Type a password for authentication. The
maximum length of the password you can set is 31
characters.
Sending Interval
Define the interval for the system to send the SMS out.
To Next Page
Loading...
Need help?
General
