Draytek Vigor2120 Series User Manual

Vigor2120 Series User’s Guide
229
Available settings are explained as follows:
Item Description
Activate
Click it to access into MyVigor for activating WCF service.
Setup Query Server
It is recommended for you to use the default setting,
auto-selected. You need to specify a server for categorize
searching when you type URL in browser based on the web
content filter profile.
Setup Test Server
It is recommended for you to use the default setting,
auto-selected.
Find more
Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.
Test a site to verify
whether it is categorized
Click this link to do the verification.
Set to Factory Default
Click this link to retrieve the factory settings.
Default Message
You can type the message manually for your necessity or
click this button to get the default message which will be
displayed on the field of Administration Message.
Cache
None – the router will check the URL that the user wants to
access via WCF precisely, however, the processing rate is
normal. Such item can provide the most accurate URL
matching.
L1 – the router will check the URL that the user wants to
access via WCF. If the URL has been accessed previously,
it will be stored in the router to be accessed quickly if
required. Such item can provide accurate URL matching

Draytek Vigor2120 Series Specifications

General

Brand	Draytek
Model	Vigor2120 Series
Category	Network Router
Language	English