EasyManuals Logo

Draytek Vigor2120 Series User Manual

Draytek Vigor2120 Series
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #339 background imageLoading...
Page #339 background image
Vigor2120 Series User’s Guide
323
2. The following page will appear.
Available settings are explained as follows:
Item Description
Enable Application
Server
Check the box to enable such profile.
Application Name
Type a name for such application. The length of the name is
limited to 23 characters.
Application
There are three types offered for you to create an
application profile.
Virtual Network Computing (VNC) – It allows you to
access and control a remote PC through VNC protocol.
Remote Desktop Protocol (RDP) – It allows you to access
and control a remote PC through RDP protocol.
SMB Application - It allows you to access and control a
remote PC through RDP protocol.
IP Address
If you choose VNC or RDP, you have to type the IP address
for this protocol.
Port
If you choose VNC or RDP, you have to specify the port
used for this protocol. The default setting is 5900.
Idle Timeout
If you choose VNC, you have to specify the time for
disconnecting the SSL VPN tunnel.
Scaling
If you choose VNC, you have to choose the percentage
(100%, 80%, 60%) for such application.
Screen Size
If you choose RDP, you have to choose the screen size for
such application.
SMB Path
If you choose SMB, you have to type the path (e.g.,
\\ip\directory or \\Computer Name\directory) for SMB
service.
3. Enter the required information.

Table of Contents

Other manuals for Draytek Vigor2120 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek Vigor2120 Series and is the answer not in the manual?

Draytek Vigor2120 Series Specifications

General IconGeneral
BrandDraytek
ModelVigor2120 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals