Vigor2120 Series User’s Guide
342
The settings on simple web user interface will be different
with full web use interface accessed by using the
administrator password.
Password
Type in new password in this field. The length of the
password is limited to 31 characters.
Confirm Password
Type in the new password again.
Password Strength
Display the security strength of the password specified
above.
Set to Factory Default
Click to return to the factory default setting.
When you click OK, the login window will appear. Please use the new password to access
into the web user interface again. Below shows an example for accessing into User Operation
with User Password.
1. Open System Maintenance>>User Password.
2. Check the box of Enable User Mode for simple web configuration to enable user mode
operation. Type a new password in the field of New Password and click OK.
3. The following screen will appear. Simply click OK.
4. Log out Vigor router web user interface by clicking the Logout button.
To Next Page
Loading...
Need help?
General
