Draytek Vigor2120 Series User Manual

Vigor2120 Series User’s Guide
355
The maximum length of the text is limited to 23 characters.
Manager Host IP (IPv4)
Set one host as the manager to execute SNMP function.
Please type in IPv4 address to specify certain host.
Manager Host IP (IPv6)
Set one host as the manager to execute SNMP function.
Please type in IPv6 address to specify certain host.
Trap Community
Set trap community by typing a proper name. The default
setting is public.
The maximum length of the text is limited to 23 characters.
Notification Host IP
(IPv4)
Set the IPv4 address of the host that will receive the trap
community.
Notification Host IP
(IPv6)
Set the IPv6 address of the host that will receive the trap
community.
Trap Timeout
The default setting is 10 seconds.
Enable SNMPV3 Agent
Check it to enable this function.
USM User
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Auth Algorithm
Choose one of the encryption methods listed below as the
authentication algorithm.
Auth Password
Type a password for authentication. The maximum length
of the text is limited to 23 characters.
Privacy Algorithm
Choose one of the methods listed below as the privacy
algorithm.
Privacy Password
Type a password for privacy. The maximum length of the
text is limited to 23 characters.
Click OK to save these settings.

Draytek Vigor2120 Series Specifications

General

Brand	Draytek
Model	Vigor2120 Series
Category	Network Router
Language	English