Draytek Vigor2120 Series User Manual

Vigor2120 Series User’s Guide
468
0: disable
1: enable
Default is disable.
-p <ratio>
It means to enable bandwidth limit ratio for UDP.
-t <mode>
It means to enable/disable Outbound TCP ACK Prioritize.
0: disable
1: enable
-V
Show all the settings.
-D
Set all to factory default (for all WANs).
[…]
It means that you can type in several commands in one line.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
> qos setup -m 3 -i 9500 -o 8500 -r 3:20 -u 1 -p 50 -t 1
WAN1 QOS mode is both
Wan 1 is XDSL model ,don,t need to set up
Wan 1 is XDSL model ,don,t need to set up
WAN1 class 3 ratio set to 20
WAN1 udp bandwidth control set to enable
WAN1 udp bandwidth limit ratio set to 50
WAN1 Outbound TCP ACK Prioritizel set to enable
QoS WAN1 set complete; restart QoS
>

Draytek Vigor2120 Series Specifications

General

Brand	Draytek
Model	Vigor2120 Series
Category	Network Router
Language	English