Vigor2120 Series User’s Guide
36
2
2
.
.
1
1
.
.
1
1
.
.
4
4
D
D
H
H
C
C
P
P
1. Open Wizards>>Quick Start Wizard. Finish the password settings and click Next.
2. Choose WAN1 as the WAN Interface and click the Next button.
3. The following page will be open for you to specify Internet Access Type. Click DHCP
as the Internet Access Type. Then click Next to continue.
4. Click DHCP as the Internet Access type. Simply click Next to continue. Then click Next
for viewing summary of such connection.
Available settings are explained as follows:
Item Description
Host Name
Type the name of the host.
Note: The maximum length of the host name you can set is
39 characters.
MAC
Some Cable service providers specify a specific MAC
address for access authentication. In such cases you need to