VigorAP 910C User’s Guide
128
After finishing this web page configuration, please click OK to save the settings.
Open / Shared for Security Mode
Available settings are explained as follows:
Item Description
Encryption Type
Choose None to disable the WEP Encryption. Data sent to the
AP will not be encrypted. To enable WEP encryption for data
transmission, please choose WEP.
WEP Keys
Four keys can be entered here, but only one key can be
selected at a time. The format of WEP Key is restricted to 5
ASCII characters or 10 hexadecimal values in 64-bit
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The allowed
content is the ASCII characters from 33(!) to 126(~) except '#'
and ','.
To Next Page
Loading...
Need help?
General
