EasyManuals Logo

DSC PowerSeries PC1404 Installation Guide

DSC PowerSeries PC1404
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
PC1404
24
[343] Opening (Disarming) Reporting Codes, Access Codes 17-32
[344] Miscellaneous Opening (Disarming) Reporting Codes
[345] Maintenance Alarm Reporting Codes
[346] Maintenance Alarm Restore Reporting Codes
[347] Miscellaneous Maintenance Reporting Codes
[348] Test Transmission Reporting Codes
[350] Communicator Format Options
*Failure to communicate using Residential Dial will not generate an FTC trouble.
[351] Alarm/Restore Communicator Call Directions
[359] Tamper Alarm/Restore Communicator Call Directions
Code 17 Code 18 Code 19 Code 20 Code 21 Code 22 Code 23 Code 24
|___|___| |___|___| |___|___| |___|___| |___|___| |___|___| |___|___| |___|___|
Code 25 Code 26 Code 27 Code 28 Code 29 Code 30 Code 31 Code 32
|___|___| |___|___| |___|___| |___|___| |___|___| |___|___| |___|___| |___|___|
|___|___| For Future Use |___|___| For Future Use
|___|___| For Future Use |___|___| Auto-Arm Cancel/Postpone
|___|___| For Future Use |___|___| Special Opening
|___|___| For Future Use |___|___| For Future Use
|___|___| Battery Trouble Alarm |___|___| Auxiliary Power Supply Trouble Alarm
|___|___| AC Failure Trouble Alarm |___|___| For Future Use
|___|___| Bell Circuit Trouble |___|___| General System Trouble
|___|___| Fire Trouble Alarm |___|___| General System Supervisory
|___|___| Battery Trouble Restore |___|___| TLM Restore
|___|___| AC Failure Trouble Restore |___|___| General System Trouble Restore
|___|___| Bell Circuit Trouble Restore |___|___| General System Supervisory Restore
|___|___| Fire Trouble Restore |___|___| System Reset (Cold Start)
|___|___| Auxiliary Power Supply Trouble Restore
|___|___| Telephone #1 FTC Restore |___|___| Delinquency Reporting Code
|___|___| Telephone #2 FTC Restore |___|___| For Future Use
|___|___| Event Buffer 75% Full |___|___| For Future Use
|_0_|_0_| DLS Lead IN |_0_|_0_| Installer Lead Out
|_0_|_0_| DLS Lead OUT |_0_|_0_| Installer Lead In
|___|___| General Zone Fault Alarm |___|___| Telephone #3 FTC Restore
|___|___| General Zone Fault Restore |___|___| Telephone #4 FTC Restore
|___|___| Walk Test End |___|___| Periodic Test Transmission
|___|___| Walk Test Begin |___|___| System Test
1st Telephone Number 2nd Telephone Number 3rd Telephone Number 4th Telephone Number
Default 04 |___|___| Default 04 |___|___| Default 04 |___|___| Default 04 |___|___|
01 20 BPS, 1400 Hz 02 20 BPS, 2300 Hz 03 DTMF Contact ID 04 SIA FSK
06* Residential Dial 07 10 BPS, 1400Hz 08 10 BPS, 2300Hz 09 Private Line
Option 1
First Telephone
Number (Default ON)
Option 2
Second Telephone
Number (Default OFF)
Option 3
Third Telephone
Number (Default OFF)
Option 4
Fourth Telephone
Number (Default OFF)
Option 5-8
Future Use
(Default ON)

Option 1
First Telephone
Number (Default ON)
Option 2
Second Telephone
Number (Default OFF)
Option 3
Third Telephone
Number (Default OFF)
Option 4
Fourth Telephone
Number (Default OFF)
Option 5-8
Future Use
(Default ON)


Table of Contents

Other manuals for DSC PowerSeries PC1404

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC PowerSeries PC1404 and is the answer not in the manual?

DSC PowerSeries PC1404 Specifications

General IconGeneral
BrandDSC
ModelPowerSeries PC1404
CategorySecurity System
LanguageEnglish

Related product manuals