SPEECH AND SOUND CONTROL
D-306232 WP8010/WP8030 V18 DSC EN USER 15
Once the last of the boxes disappears, RECORDING ENDED will be displayed.
When you release the button, the display will revert to the normal status-displaying mode, but will also indicate
that a message is waiting. For example:
(alternating)
To check your own message, listen to it within one minute from the end of recording (see the next section -
Message Playback). This way the MSG indication will not be erased.
Message Playback
To listen to a message left by another user of the system:
Click
and listen. PLAY will be displayed and the message will be played back over the built-in
loudspeaker. When the playback ends, the display will revert to the normal status-displaying mode. If more than
1 minute elapsed after recording, the MSG indication will disappear.
To Next Page
Loading...
Need help?
General
