MAINTENANCE
58 D-306232 WP8010/WP8030 V18 DSC EN USER
When the WP Panel display reads [ENTER CODE: _], enter the current
master user code.
The "Happy Tune" will sound and the WP Panel display will read [LIST OF
EVENTS]. (see Important Note!)
Click the button. The latest event will be shown.
The event is displayed in two parts, for example, "Z13 alarm" then "09/02/10
3:37 P".
The two displays will be shown alternately until clicking again to move
to the next event or until the event log times out (4 minutes).
Click the button as many times as necessary to read all the required
data.
Important Note! Entering an incorrect code 5 times in a row will initiate a 30-
second penalty lockout of the keypad.
Attention: The system will not allow you to erase the event log. Only the
installer is authorized to view and perform this function.
Exiting the Event Log
Click the or button from anywhere within the event log.
The WP Panel display will read [<OK> TO EXIT].
The system reverts to the normal operating mode.
To Next Page
Loading...
Need help?
General
