DSC WP8030 User Manual

APPENDICES
60 D-306232 WP8010/WP8030 V18 DSC EN USER
Alarms
Response
Notes
zone # display, .
A2. KP-140/141 PG2
Arming and Disarming the System
Step
Basic Arming
User Actions
Keypad & Panel Response
1
Select a PARTITION
(Partition enabled)
or or
The selected button lights.
2
Arm AWAY
The selected button starts blinking
and prompts you to enter your
"User Code" or present your Tag.
See step 3.
Arm HOME
Disarm (OFF)
Quick arm AWAY
( 2 sec.)
The keypad's LED blinks red once
to indicate transmission of the
arming command to the control
panel. The control panel's
response is then indicated on the
keypad via the LED and the
buzzer – see KP-140 PG2 User's
Guide, “Panel Response to
Keypad Commands” section 3.5
Quick arm HOME
( 2 sec.)
3
Enter USER CODE or
present Proximity TAG.
[USER CODE] or [present TAG]
[DURESS CODE] (2580 by default)
4
INSTANT
(After arming HOME/ AWAY)
The keypad's LED blinks red once
to indicate transmission of the
command to the control panel. The
control panel's response is then
indicated on the keypad via the
LED and the buzzer – see KP-140
PG2 User's Guide, “Panel
Response to Keypad
Commands” section 3.5.
LATCHKEY
(After arming AWAY)
Automation
Output Function
Actions
Response
PGM device ON
[PGM  00]
The keypad's LED blinks
red once to indicate
transmission of the
command to the control
panel. The control panel's
response is indicated on the
keypad via the LED and the
buzzer – see KP-140 PG2
User's Guide, “Panel
Response to Keypad
Commands” section 3.5.
PGM device OFF
[PGM  00]
PGM device TOGGLE
[PGM  00]
Initiating Alarms
Other Functions
Alarm
Actions
Response
Function
User Actions
Response
Emergency
alarm
( 2 sec.)
See KP-140
PG2 User's
Guide, “Panel
Response to
Keypad
Commands”
section 3.5
AUX Function
(see Note)
See section
3.5 of KP-140
PG2 User's
Guide.
Fire alarm
( 2 sec.)
STATUS
indication
See section
3.6 of KP-140
PG2 User's
Guide.

DSC WP8030 Specifications

General

Brand	DSC
Model	WP8030
Category	Control Panel
Language	English