Note: For the AUX button configuration, see the
KP-140 PG2 Installation Instructions.
A3. PG9939
When executing a command, the keyfob's LED blinks
red once to indicate transmission of the command to
the control panel. If the operation is successfully
completed, the green LED lights momentarily and a
"happy tune" is heard. If the operation fails or cannot
be completed, for example, when the system is "not
ready", the red LED lights steadily and a "sad tune" is
heard
,
see PGx9939 User's Guide, “Panel
Response to Keyfob Commands” section 3.2.
To Next Page
Loading...
Need help?
General
