DSC WP8030 User Manual

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
52 D-306232 WP8010/WP8030 V18 DSC EN USER
Remote Control by SMS
Note: This feature is not to be not to be enabled in UL Listed product.
WP Panel system with GSM unit can respond to SMS commands from any cellular telephone (a detailed SMS
message sending process is described in the cellular telephone user‟s guide).
The various SMS commands are detailed in the following table.
In this table, “<code>” means a 4-digit user code and simply means blank space (see Note).
SMS Command List
Command
Individual Partition SMS Format
All Partitions SMS format
1
Arm AWAY
“AWAY <code>”
or
“AW <code>”
“P# AWAY <code>”
or
“P# AW <code>”
2
Arm AWAY instant
“AWAY INST <code>”
or
“AWI <code>”
“P# AWAY INST <code>”
or
“P# AWI <code>”
3
Arm AWAY
Latchkey
“LATCHKEY <code>”
or
“LK <code>”
“P# LATCHKEY <code>”
or
“P# LK <code>”
4
Arm AWAY
Latchkey instant
“LATCHKEY INST <code>”
or
“LKI <code>”
“P# LATCHKEY INST <code>”
or
“P# LKI <code>”
5
Arm HOME
“HOME <code>”
or
“HM <code>”
“P# HOME <code>”
or
“P# HM <code>”
6
Arm HOME instant
“HOME INST <code>”
or
“HMI <code>”
“P# HOME INST <code>”
or
“P# HMI <code>”
7
Disarm
“DISARM <code>”
or
“DA <code>”
“P# DISARM <code>”
or
“P# DA <code>”
8
Turn PGM on
1
“PGM ON <code>”
“P# PGM ON <code>”
9
Turn PGM off
1
“PGM OFF <code>”
“P# PGM OFF <code>”
10
Define custom
house identity
2
“HOUSE NAME <code> <house ID>”
or
“HN <code> <house ID>”
“P# HOUSE NAME <code> <house ID>”
or
“P# HN <code> <house ID>”
11
Query system
status
“STATUS <code>”
or
“ST <code>”
“P# STATUS <code>”
or
“P# ST <code>”
Note: The WP Panel may react with a delay to received SMS messages if a GPRS session is in progress at the
same time.
1
Refers to WP8030 only
2
House ID includes up to 16 characters, for example, JOHN'S HOUSE

DSC WP8030 Specifications

General

Brand	DSC
Model	WP8030
Category	Control Panel
Language	English