Specifications
8
3.1.2 DSE9200 CHASSIS MOUNT BATTERY CHARGERS
9130 - 001 - 00
NOTE: For descriptions of other Hardware Revisions, please contact
support@deepseaplc.com
NOTE: - The DSE9250 battery charger is now obsolete, details provided for information
only.
NOTE: For variant 03 (For other battery types), the float voltage can be adjusted between
12.5V and 15V for DSE9130 12V 5A chargers (25V - 30V for DSE9250 24V 3.7A chargers). This
change must be made at the DSE factory. Ensure the correct variant (and float voltage if
applicable) is specified on ordering. Consult your battery manufacturer for further details of
required float voltage.
Product type
Variant
Hardware revisions
First version hardware
001
00
For 9 or 18 cell NICAD batteries*
12V charger set to 13.0V
24V charger set to 26.0V
01
For 10 or 20 cell NICAD batteries*
12V charger set to 14.5V
24V charger set to 29.0V
02
For other battery types*
Specify required float voltage on ordering**
03
DSE9250 24V 3.7A
9250
DSE9255 24V 5A
9255
DSE9260 24V 10A
9260
For lead acid batteries
12V charger set to 13.7V
24V charger set to 27.4V
To Next Page
Loading...
