DSE DSE9130 - User Manual

DSE 
®
The 2 Amp, 3 Amp and 5 Amp
Battery Chargers have been
designed to be permanently
connected to a battery, keeping it
charged to maximum capacity.
The chargers can be either
mounted via DIN rail or to the
chassis, using the fixing holes that
are built into the case. The chargers
stylish design includes an LED
indicator on the front that shows
when the charger is in a normal or
overload condition.
The chargers will continue to
operate during cranking and
running. All chargers can accept
multiple AC voltage connections.
The DSE battery chargers are
expertly designed using high-grade
components and capacitors
allowing the units to function more
efficiently, providing a longer and
more reliable life-span than other
chargers in their class. Their in-
built robustness makes them ideal
for the rigours of a wide variety of
markets including heavy and light
industrial environments.
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITY
B
S EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30
o
C
BS EN 60068-2-2
Bb/Be Dry Heat +55
o
C
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three
major axes
5
Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55
o
C
@
95% RH 48 Hours
B
S EN 60068-2-78
C
ab Damp Heat Static 40
o
C
@ 93% RH 48 Hours
S
HOCK
B
S EN 60068-2-27
T
hree shocks in each of three major axes
1
5 gn in 11 mS
ISSUE 5
CHARGE OUTPUT AC POWER SUPPLY
FEATURE LIST TO SUIT A WIDE VARIETY
OF APPLICATIONS


DSE9000
CHARGE BOOST INPUT
(Not available for DSE9150 & DSE9155)
N/C VOLT FREE CHARGE FAIL OUTPUT
(Not available for DSE9150)
1 1
COMPATIBLE WITH ALL DSE MODULES
1ph
N
DSE9130
,
DSE915
0,
DSE9
155
&
DSE
9255
C
O
M
P
AC
T
B
AT
T
ERY
C
H
AR
G
E
R
S
2
AM
P,
3
AM
P
&
5
AM
P
O
PT
I
O
N
S
F
E
A
T
U
R
E
S

Summary

Product Features and Environmental Standards

Product Features Overview

Highlights key functionalities, advanced features, and benefits of the DSE compact battery chargers.

Environmental Testing Compliance

Details adherence to critical environmental and safety testing standards for reliable operation.

Technical Specifications

Part Numbering and Variants

Explains the part numbering system and available configuration variants for DSE chargers.

Common Electrical Characteristics

Lists general electrical parameters like input voltage, frequency, ripple, and efficiency across the series.

Output Performance Details

Provides specific output voltage, current ratings, and efficiency curves for various charger models.

Physical Dimensions and Mounting

Specifies physical sizes, mounting options (DIN rail, chassis), and hole patterns for installation.

Applicable Industry Standards

Lists relevant certifications and compliance standards, ensuring product quality and safety.

Installation and Connectivity

Installation and Setup Guidelines

Covers essential steps for safe and correct installation, including panel mounting and battery suitability.

User Connections and Wiring Diagrams

Details terminal assignments, cable sizing, and typical wiring configurations for DSE chargers.

Operation and Indicators

LED Indicators and Status Interpretation

Explains the meaning of LED indicators for status, charging modes, and fault conditions.

Operating Modes and Battery Charging Profiles

Describes charger modes (PSU, Bulk, Absorption, Float, Boost) and charging profile configurations.

Troubleshooting and Product Lifecycle

Fault Diagnosis and Problem Solving

Provides guidance on identifying and resolving common operational issues and faults.

Warranty, Service, and Disposal

Outlines product warranty, maintenance recommendations, and environmentally responsible disposal procedures.

DSE DSE9130 Specifications

General

Brand	DSE
Model	DSE9130
Category	Battery Charger
Language	English