Specifications
30
3.6.2 DSE908 12V & 24V 10A CABINET MOUNTED BATTERY CHARGER
Cabinet type
AE1031.500 by Rittal –
Rittal website www.rittal.de / www.rittal.co.uk
Overall size
380mm x 300mm x 210mm
(15.0.” x 11.8”x 8.3”)
Material:
Sheet steel enclosure of all-round solid construction
Single door, right hand hinge with one cam lock
Foamed-in door seal
1 foamed in gland plate in the enclosure base
(Gland plate supplied blank, ready for customer drilling as
required).
Surface finish:
Dipcoat primed, powder-coated on the outside in textured RAL
7035
Protection category:
IP20
NEMA 1
Weight 15kg
Mounting type
Wall mounting. Can be mounted by customer drilled holes or by
using Rittal mounting brackets, suitable for Rittal cabinet type
AE1030.500 – For example Rittal Part number 2508.010 (Pack of
4)
Rittal website www.rittal.de / www.rittal.co.uk
Input voltage (nominal) 110V-277V
Input voltage (absolute range) 90V-305V
Charge failure relay rating
3A DC resistive
30V maximum
Operating Temperature
-30°C to 55°C
(-22°F to 131°F)
Controls
AC Power on/off
Boost charge on/off
Indication
0A-15A DC ammeter
Power on Red neon indicator
AC Fuse
Fuse holder mounted onto front panel.
Accepts 2A anti-surge fuse (20mm x 5mm fuse)
Dimensions in mm
380mm
300mm
210mm
To Next Page
Loading...
