E
88
Brakes
Front
With double semi-floating drilled disc.
Braking surface material:
steel.
Flange material:
aluminium.
Disc diameter:
320 mm.
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
79 cm
2
.
Make of brake callipers:
BREMBO
Type:
34-4 pistons.
Friction material:
TOSHIBA TT 2172
Master cylinder type:
PR18.
Rear
With fixed drilled steel disc.
Disc diameter:
240 mm.
Hydraulically operated by a pedal on R.H. side.
Braking surface:
32 cm
2
.
Make:
BREMBO
Type:
34 - 2 pistons
Friction material:
FERIT I/D 450 FF.
Master cylinder type:
PS 11B.
Warning
Brake fluid is corrosive. In the event of accidental
contact with eyes or skin, wash the affected area with
abundant running water.
ProCarManuals.com
To Next Page
Loading...
