The levels “On” and and the bike with the
by the highlighted, followed by the
reference indications, are displayed.
The of the screen shows the level currently
set.
Use (1) and (2) to scroll and select the desired
level. Press ENTER (3) to validate, then select "Back",
and press ENTER (3) again to exit.
The DQS with feature “ON” allows the rider to
and without using the clutch lever.
It includes a two-way microswitch - built in the lever
mechanism - that outputs a signal to the engine
control unit whenever the is operated. The
system works in a separate way for and
and combines the action on ignition
advance and injection, available in the
system, with controlled opening for
operation during Extent and duration
of these actuations aim at ensuring excellent
engagement smoothness under any riding
condition; system works in synergy with slipper
clutch during
The user can decide whether to activate only the
feature or both up and down features of the
N
Gear
On
Riding mode Touring DQS
On
Off
Back
Fig 113
198
To Next Page
Loading...
