Firing points per injector: 4.
Fuel supply: 95-98 RON.
The motorcycle is only compatible with fuel
having a maximum content of ethanol of 10% (E10).
Using fuel with ethanol content over 10% is
forbidden. Using it could result in severe damage of
the engine and motorcycle components. Using fuel
with ethanol content over 10% will make the
warranty null and void.
Brakes
Separate-action anti-lock braking system operated
by hall-type sensors mounted to each wheel with
phonic wheel detection: ABS can be temporarily
disabled (refer to "ABS deactivation").
FRONT
Front brake discs
Semi-floating drilled twin-disc.
Braking material: stainless steel.
Carrier material: aluminium, painted black.
Disc diameter: 320 mm (12.60 in).
Disc braking 265 sq.
cm (32.55 in
2
).
Front brake disc thickness: 6 mm (0.24 in).
Maximum wear on disc thickness: 4 mm (0.16 in).
Front brake control
Hydraulically operated by a control lever on
handlebar right-hand side.
Lever with knob to adjust the distance to handgrip
on handlebar.
Brake lever master cylinder diameter: 16 mm (0.63 in)
Brake master cylinder PR 18/19.
Front brake calliper
Make: Brembo Monoblock (M50) with radial
connection and 4 pistons, Bosch Cornering ABS.
Calliper pistons: No. 4 pistons Ø30 mm (1.18 in).
Friction material: TT2182 FF.
Front brake master cylinder
Brake master cylinder type: PR 16/22.
REAR
Rear brake disc
With fixed drilled stainless steel disc.
Disc diameter: 265 mm (10.43 in).
Disc braking 265 sq.
cm (32.55 sq.
in).
Front brake disc thickness: 6 mm (0.24 in).
Maximum wear on disc thickness: 5.4 mm (0.21 in).
Braking 210 sq.
cm (32.55 in
2
).
Rear brake control
Hydraulically operated by a pedal on RH side.
302
To Next Page
Loading...
