Ducati DESERTX - Setting Menu - Riding Mode - Default

 menu – Riding Mode –
Default
This function allows restoring the values of the
parameters linked to the Riding Modes set by
Ducati, and is visible only if the parameters have
been previously modified.
Restoring the parameter values for a single
Riding Mode:
●
From the Interactive Menu, use  (1) and
(2) to select the item  menu" and press
ENTER (3).
●
Select the "Riding Mode" item and press ENTER
(3).
●
Select the Riding Mode you wish to customise
and press ENTER (3).
●
Select the "Default" item and press ENTER (3).
The message “Wait…” is displayed for a few
seconds followed by the message “Restored”.
Then “Default” disappears from the menu list.
N
Gear
Riding mode Touring
Default
Info mode
Back
1
3
2
Fig 116
202